⎝⎛中国足彩app⎞⎠

Hello! Welcome to the website of Dongguan Lixiang Air Conditioning Purification Engineering Co., Ltd.!
share it

Project Category

Main project classification

Use and cleaning method of environmental protection air conditioning for workshop cooling equipment of ventilation and cooling project


Ventilation and cooling project workshop cooling equipment environmental air-conditioning use and cleaning methods: the water added to the pool mouth should be clean water to keep the environmental protection air-conditioning pipelines unblocked and the high efficiency of the water curtain. If there is insufficient or uneven water supply to the water curtain, check whether there is water shortage in the pool (the float ball valve in the pool can automatically replenish and cut off water), whether the water pump is running, and the water supply pipe and water pump inlet, especially on the water spray pipe Whether the small holes in the plug are blocked, check whether the water spray pipe is located in the middle of the wet curtain. ) The water curtain + environmental protection air-conditioning control switch should be installed indoors. Before use, the water curtain and the pool should be free of debris. It should be cleaned once or twice a year. When not in use, the water in the pool should be drained and used. The plastic cloth box is wrapped well to prevent sundries from entering the machine and prevent dust.
Environmental protection air-conditioning cleaning method for workshop cooling equipment:
When cleaning the environmental protection air conditioner, it is necessary to disconnect the power supply and fold the empty system board to prevent someone from misleading the switch and causing danger. Unscrew the screws of the environmental protection air-conditioning filter net, lift the filter net upward, and then pull the filter shading part outward to remove the filter net, of course, the method of removing the wet curtain is the same.
Carefully remove the four filters of the environmental protection air conditioner, soak them in clean water and rinse them. Remember not to put any chemicals in order to avoid corrosion of the wet curtain and the filter, and the water pressure should not be too high, so as not to damage the filter and the wet curtain. .
Cover the environmentally friendly air conditioner with a plastic bag, connect tap water to the spray pipe and the cleaning port, and flush the spray pipe with water in the reverse direction. Rinse with clean water and environmentally friendly air conditioner. Put the four filters or wet curtains back on the environmental air conditioner. Then reconnect the main power of the environmental protection air conditioner, and then perform other operations after a few minutes.
Environmental protection air conditioner, air cooler is the use of water circulation to cool the air temperature. The air contains a lot of dust. After working for a long time, it is necessary to clean the filter of the air conditioner host regularly.
1. Disconnect the main power supply of the air conditioner (remove the control panel to prevent someone from misleading the machine and causing danger).
2. Unscrew the screws on the filter net, lift the filter net upward, and then pull the filter shading part outward to remove the filter net (wet curtain removal method is similar).
3. Carefully remove the eight filters (or wet curtains), soak and rinse with clean water (do not put any chemicals to prevent corrosion of the wet curtains and filters, and the water pressure should not be too high to avoid damaging the filters and wet curtains) .
4. Cover the fan with a plastic bag, connect the tap water to the spray pipe and the cleaning port, and flush the spray pipe with water in the reverse direction.
5. Rinse the bottom of the host with clean water.
6. Reinstall eight filters (or wet curtains) on the host.
7. Reconnect the main power supply of the environmental protection air conditioner and perform other operations after 5 minutes.
Business Consulting
WeChat public account
Mobile app