1. Clean room According to the actual situation, the primary filter of the purification workbench is removed and cleaned regularly. The cleaning cycle is generally 3-6 months. If it is not cleaned for a long period of time, dust accumulation on the purification workbench will affect the insufficient air intake side and reduce its cleaning effect.
2. If the clean room does not reach the ideal cross-section wind speed after the initial air filter is cleaned or cleaned, the working voltage of the fan should be adjusted (turn the knob) to achieve the ideal uniform wind speed from the surface. It should be noted that when the new clean bench in the clean room is used, slowly adjust the adjustment knob from left to right from low speed to high speed, and the new clean bench cannot be adjusted to the highest wind speed.
3. The clean room clean bench is generally used after 18 months of use, when the fan working voltage is adjusted to the highest point, and still cannot reach the ideal wind speed, it means that the high efficiency air filter has accumulated too much dust, and the filter holes on the filter have Basically blocked, it should be updated in time to avoid affecting the normal operation of the clean room.
4. When the high-efficiency air filter is to be replaced in the clean room, pay attention to whether the model specifications are consistent with the original manufacturer's configuration, press the arrow wind direction device, and pay attention to the seal around the filter to ensure that there is no leakage.
Related tags: Dongguan Cleanroom ︱Dongguan Purification Workshop︱Dongguan Purification Project︱Dongguan Cleanroom Project︱Clean Room Project︱Dustless Workshop Installation︱Dongguan Cleanroom Decoration︱Dongguan Purification Workshop Decoration︱Dongguan Lixiang Air Conditioning Purification Project Limited the company
Article source: http://jimesale.com Tan Yuming 13751461639