⎝⎛中国足彩app⎞⎠

Hello! Welcome to the website of Dongguan Lixiang Air Conditioning Purification Engineering Co., Ltd.!
share it

Project Category

Main project classification

Energy-saving knowledge of air conditioning in Dongguan clean room


First, the air outlet is kept smooth, do not pile up large items to block the wind, affect the cooling or heating effect, and increase power consumption.
2. When the employee leaves the room for a long time, turn off the air conditioner 10 minutes in advance to save power.
Third, open the doors and windows as few as possible when the air conditioner is running. Frequently opening and closing the doors and windows will reduce the cooling or heating effect of the air conditioner and spread the power.
4. Clean the air inlet filter and air outlet adjustment board of the air conditioner on schedule, so that the air inlet of the clean air conditioner can be unblocked, the air is kept clean, and energy consumption is reduced, which is also beneficial to human health.
Fifth, air-conditioning rooms should be installed with curtains. In summer, direct sunlight can cover about 5% of air-conditioning electricity. In winter, daylight can be injected into the room, and curtains should be used at night to prevent heat loss.
6. The air conditioner should not be turned on and off frequently. Do not start and close the air conditioner often because the room temperature has reached or exceeded the set temperature. The air conditioner should be automatically started and closed by the temperature controller.
7. It is reasonable to set the temperature of the thermostat. Generally, it is advisable to set the temperature between 24 degrees and 26 degrees. To avoid overheating or coldness, increase it by 1 degree in summer to save about 10% of electricity, and reduce it by 1 degree in winter. Can save 5-8% of electricity.
8. Open the window and ventilate for a period of time before starting up every day to reduce the indoor toxic gas concentration and keep the air fresh.
Nine, scientifically set the temperature and air volume at startup and in use. When you just start up, set high cold or high heat, large air volume, so that the period quickly reaches the ideal temperature, when the temperature is appropriate, change to common temperature, medium and low air volume Reduce energy consumption and noise.

Business Consulting
WeChat public account
Mobile app

⎝⎛中国足彩app⎞⎠