Technical grade standard of Dongguan clean room
It is also very important for the Dongguan clean room to regularly check whether the power supply line of the air purification equipment is intact. One is to ensure the safety of electricity use and the other is to ensure that the air purification equipment can run well for a long time. With the increase of the use time of air purification equipment using filtration and adsorption technology, the internal filter screen will gradually become saturated. If it is not cleaned or replaced in time, the efficiency of air purification will be reduced.
The first layer of filters commonly found inside air purification equipment is a pre-filter similar to a large air-conditioning filter, which can pre-filter larger particulate pollutants such as hair and pet hair. However, it will collect a certain amount of dust over a long period of time, which will affect the intake air and the effect of air purification, so it needs to be cleaned in time. The pre-filter is generally cleaned 1-2 times a month. When cleaning, the filter can be removed and the dust can be removed by using a vacuum cleaner or a rag. If the manufacturer indicates that the filter can be washed with water, after cleaning with water, It needs to be dried or blown with an electric hair dryer before being installed in the air purification equipment.
New perspectives should be introduced in the air-conditioning design of Dongguan clean room engineering. It can be summarized as follows: the operating room purification air conditioner is effective and irreplaceable for infection control of the operating room air path; the number of operating room burdens of a purification air conditioning system should be small or not; the introduction of the concept of pollution degree reduces At the same time, reduce the amount of air supply in the high-purification operating room; introduce the concept of local enhanced air supply.