Attention problems in Dongguan central air-conditioning installation
For Dongguan central air-conditioning installation, the refrigerant is circulated on the main unit and the indoor unit for the air duct unit. The chiller is used to centrally obtain the cooling capacity, cool / heat the fresh air, and mix it with the return air into the room. If there is no fresh air, only the return air is heated / cooled.
The air duct system can be composed of multiple compressors and an air-cooled condenser outdoors. The indoor unit is composed of evaporators and circulating fans. The number of units is the same as the number of compressors. Hidden ceiling and so on. The reason why the home looks like a drag one is mainly because of the limitation of the height of the floor, which is not convenient for towing the air duct. Therefore, basically all the ducts with relatively low static pressure and low power are used, so they look like hidden Hang up.
Dongguan central air-conditioning installation location The air-conditioning installation site should be sturdy and strong with sufficient bearing capacity.
The quality of the air-conditioning bracket must be paid attention to. Use a new bracket as much as possible to avoid safety problems caused by aging of the bracket and welding.
Keep the air-conditioning unit away from heat sources. There must be no obstacles in front of the air outlet of the indoor unit, otherwise the cooling effect of the air conditioner will be affected when the air conditioner is running.
The water flows to a low place, and the height of the drain pipe of the air conditioner must be paid attention to, so the installation height of the indoor unit is higher than the final drain. If you need to install air conditioners through several walls, the position of air conditioning holes on each wall should also be lowered in order to make drainage more smooth.