Design of courier layout in Dongguan clean room
There is another important problem in the layout of the Dongguan clean room. Although it is not specifically pointed out on the GMP, as a clean factory with complex planes, it must be paid attention to. Yi is the safe evacuation of the Dongguan clean room:
1. The space is closed. If a fire occurs, it is extremely unfavorable for evacuation and fire fighting. At the same time, because the heat leaks nowhere, the heat radiation of the fire source is reflected by the four walls to make the room heat up rapidly, which greatly shortens the time for the materials in all parts of the room to reach the ignition point. When there is no window on the exterior wall of the factory building, fires that occur indoors are often not easy to be discovered by the outside world. After discovery, it is not easy to select a breakthrough point. Taiwan, FFU fan filter unit and other parts. Among them, the air shower room can be blown by a fan to remove the dust on the operator's body. The high-efficiency air outlet is the terminal air supply device of the air conditioning purification system. The transfer window is responsible for the transfer of goods between the clean area and the non-clean area, and between the two clean rooms, which greatly reduces possible pollution.
Dongguan clean room In the clean room that has not been put into use, clean and seal the place where dust may be generated after installation. If it is already in use and needs to be installed, it is necessary to negotiate to stop production, and after the end, start the dust removal program and clean inspection. The above information is provided by Shanghai Caso Electromechanical Equipment, which is expected to be adopted.