Project CategoryMain project classification
给厂房装修的三个建议点： Three suggestions for the decoration of the Chang'an white iron project :
建议如果厂区内有众多设备，则不宜设置太多隔断及隔墙，尽量以地面的色调或者用一些有色标识来进行划分区域，用标识划分区域要避免色系过多，那样不但区域划分不明显还会令人感觉头晕目眩，还有的厂房可以明确的划分出设备区与办公区，这样的规划现在比较常见，因为便于管理。 I. Effective space division The internal space division of the plant is mainly used by the operator to make reasonable use of the space according to his actual use requirements. The Changan White Iron Project recommends that if there are many equipments in the plant area, it is not appropriate to set up too many partitions and walls. The color of the ground or the use of some colored signs to divide the area. Use the signs to divide the area to avoid too much color system. That way, not only the area is not obvious, but it also makes people feel dizzy. There are also factory buildings that can clearly divide the equipment area Office area, this kind of planning is more common now, because it is easy to manage. Therefore, when designing such a factory area, it is necessary to grasp the close combination of data and various spaces, and at the same time, consider that the working distance between the equipment area and the office area is smooth and the interference of dust and noise.
发现还有的厂房装修时需要地面承载负荷，那么就必须要在地面基层做混凝土，混凝土分为商业混凝土和土做法混凝土两种，前者造价略高但质量稳定，后者价格较低质量一般，然后在混凝土基层上再铺设其他质地比较坚硬的石材做饰面即可。 2. Pay attention to ground materials. The first thing to consider in the decoration of a factory building is the ground part. The general decoration of the factory floor does not need to bear the load. Then you can consider using some inexpensive decorative materials, such as floor tiles or composite wood floors. Factory floor decoration materials. Some buildings need to consider anti-static during decoration. Then anti-static floor or anti-epoxy floor should be selected as the preferred material for factory decoration. Chang'an white iron project found that there is also need for factory decoration. If the ground is carrying a load, then concrete must be made on the ground base. Concrete is divided into two types: commercial concrete and soil concrete. The former has a slightly higher cost but stable quality, and the latter has a lower price and average quality. Then, other materials are laid on the concrete base. The harder stone can be used as the finish. a
3. Reasonable top surface design. In addition, it is also necessary to pay attention to the top when renovating the factory building. The top of the factory building is usually higher, and most of them are steel structural frames. When decorating the top of the factory, you must first design fire protection, ventilation, and central air conditioning. Reasonable arrangements, because these are all necessary hardware facilities in the decoration of the plant, especially fire protection. The next step is to determine whether the ceiling is a problem according to the requirements of use. There are many materials for the factory ceiling. If you want to decorate the top with mineral wool sound-absorbing panels, gypsum boards, aluminum-plastic panels, etc. For any suspended ceiling, it is also a modern, minimalist design to partially modify some of the facilities that need to be hidden or unattractive on the top.
Related links: Dongguan air-conditioning purification project, Dongguan dust-free purification equipment, Changan central air-conditioning project, Dongguan purification ventilation project, Dongguan dust-free purification project, Dongguan 100,000-level dust-free workshop, Dongguan 100,000-level purification workshop, Dongguan Lixiang Air-conditioning Purification Engineering Co., Ltd.
Article source: http://jimesale.com Tan Yuming 13751461639