Project CategoryMain project classification
Purification workshop engineering operation matters
1. The purification equipment used in Dongguan purification project should not be switched on and off frequently. Do not turn on and off the air conditioner frequently because the room temperature has reached or exceeded the set temperature. The air conditioner should be automatically turned on and off through the temperature controller. Set the temperature of the thermostat reasonably. Generally, it is advisable to set the temperature between 24 ° C and 26 ° C. To avoid overheating or overcooling, increase the temperature by 1 ° C in summer to save about 10% of electricity, and reduce it by 1 ° C in winter. Electricity 5-8%.
2. Open the doors and windows as little as possible when the air conditioner is running. Frequently opening and closing the doors and windows of the Dongguan purification project will reduce the cooling or heating effect of the air conditioner and waste electrical energy.
3. The air-conditioning rooms in Dongguan purification project should be installed with curtains. In summer, direct sunlight can block about 5% of air-conditioning electricity. In winter, daylight can be injected into the room, and curtains should be used at night to prevent heat loss.
4. Regularly clean the air inlet filter and air outlet wind direction adjustment plate of the air conditioner, so that the air intake of the air conditioner can be unobstructed, keep the air clean, reduce energy consumption, and also be beneficial to human health.
5. The air outlet is kept smooth. Do not pile up large items to block the wind, affect the cooling or heating effect, and increase power consumption.
6. When personnel leave the room for a long time, turn off the air conditioner 10 minutes in advance to save power.
7. Open the window and ventilate for a period of time before starting each day. The Dongguan purification project reduces the indoor toxic gas concentration and keeps the air fresh.
8. Scientifically set the temperature and air volume during startup and use. When you just start up, first set high or low temperature, high air volume, and make the period reach the ideal temperature quickly. When the temperature is suitable, change to common temperature, medium and low air volume. Reduce energy consumption and noise.